Vacuflo Pipes & Fittings
PVC Pipe & Fittings for Vacuflo Central Vacuum Systems
Shop all Central Vacuum PVC Pipe & Fittings
Need PVC pipe or fittings for your central vacuum installation project? We got you covered. ThinkVacuums.com carries all the fittings, adaptors, and tubing for [brandname] "In-Home" vacuums that is necessary for the success of your central vacuum system installation. Not sure what type of fitting you need or just need assistance? Give us a call at 1-800-322-2965 and one of our central vacuum experts will be happy to help!
FlowMax Gold PVC Pipe - Superior Fit to Fittings
FlowMax Gold is manufactured to rigorous standards to ensure part-to-part consistency. Better cuts, consistent fit to fittings, and superior cement adhesion let you get your installation done right and quickly the first time – every time.
Click Here To Read More About PVC Pipe For Central Vacuums
-
The 90-Degree Short Elbow Fitting is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$2.70 -
The 90-Degree Sweep Elbow is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. This central vacuum elbowl features sweep fitting for 90-degree connection of two central vacuum 2-inc... Learn More
$2.70 -
The 90-Degree Sweep T Elbow is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$4.00 -
The Pipe Cap Fitting is a 2-inch inside diameter white PVC cap. This cap can be used to seal off central vacuum system piping in new or retrofit applications. Learn More
$2.45 -
This pipe strap with a wire holder is a white PVC pipe strap that is used to attach the central vacuum system PVC pipe to wood joists or studs. The pipe strap has two screw holes for mounting. A plastic clip on the pipe strap can be used as a wire trap to retain the low voltage c... Learn More
$1.95 -
The 45-degree "Y" Fitting is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. With this fitting two PVC pipes connect through a straight coupling with a third entering at a 45-degre... Learn More
$3.45 -
The Central Vacuum Straight Coupling is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$1.95 -
The 45-degree Short Elbow Fitting is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$2.45 -
The 45 Degree 3-Way is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$2.35 -
The 90 Degree Sweep Spigot is a white 2-inch PVC male-to-female coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. This fitting connects pipe to the female connection of another fitting. Learn More
$2.95 -
The 90 Degree Sweep 3-Way is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. Learn More
$2.95 -
This central vacuum pipe collar is a 2" inside diameter white collar. The collar is used to finish out the exposed central vacuum system pipe where it passes through the wall. The collar slides over the pipe to hide the hole cut in the wall. A slot is provided in the collar for p... Learn More
$1.99 -
-
The central vacuum 90 Degree Short Tee Fitting fitting is suitable for various wall applications that involve additional pipe lines oriented horizontally or vertically. Thus, central vacuum users can mount such an installation component to connect various pipe lines unfolding ove... Learn More
$4.49 -
The Central Vacuum Inlet Valve Extension is a white male-to-female coupling specifically designed to have low internal surface friction for air handling use in central vacuum system applications. This fitting extends the distance allowed between a wall inlet and the mounting plat... Learn More
$5.99 -
If you have thick walls then the Inlet Extension Sleeve might be the right one for you. This extension sleeve is made to connect an inlet to a flanged fitting through thick walls or floors. The NuTone extension sleeve is 3 inches in length. Learn More
$19.95 -
Cuts Through Central Vacuum Pipe With Ease
For Use With 2" Outside Diameter Vacuum Pipe
Clean Perfect Cuts With No Frayed Edges
Made Of Heavy Duty ABS Material
Made of heavy duty ABS. Simply slides over 2 inch outside diameter vacuum pipe and with a couple of turns you ... Learn More
$35.95 -
If in the event your house was "roughed in" with 2-inch plumbing PVC, this is the adaptor to convert to central vacuum elbows, pipe, and fittings. (White Only) Learn More
$4.90 -
True Central Vacuum Thin Wall PVC 2" O.D. NEVER use Plumbing PVC. Premium quality virgin "Flomax Gold". No regrinds. Sold in 5-Foot lengths. Shipping WILL apply to this item. Item may be cut in half for shipping purposes if less than 5 are purchased. Learn More
$26.99 -
100 ft. schedule 18/2 low voltage wire. This wire is what connects your inlets to the central vacuum allowing the circuit to be completed when a hose is inserted into an inlet. This connection then tells the central vacuum to turn on. Learn More
$68.95 -
Fast Setting Bonding Agent
For Use With Central Vacuum Pipes
A Must Have For New Central Vacuum Installations
Clear Regular Bodied Cement
A fast setting bonding agent for central vacuum PVC pipes, Whitlam PVC Cement is a must-have item for new cent... Learn More
$14.95 -
The central vacuum pipe strap (also known as the Hub Strap) is an essential component when it comes to attaching any number of pieces of central vacuum system piping to wooden stubs, trusses, joists or any similar mounting surfaces. This central vacuum pipe strap is to be used wi... Learn More
$1.95 -
This installation DVD takes you through the basics of installing low voltage as well as electrical valves. In addition it also helps with tips on connecting pipe and fittings as well as common mistakes in installation. Learn More
$19.97 -
Attach to any pipe end, inlet, or hose end of your central vacuum system to quickly identify clogs, leaks, broken pipes, motor issues and more. Designed for use with 2" Central vacuum pipe. Learn More
$89.50 -
Heavy Duty Metal Hose Clamp
2" Adjustable Clamp
Easily Secures Central Vacuum PVC Pipe & Fittings
This heavy duty metal hose clamp is a 2-Inch adjustable clamp that secures central vacuum PVC pipes and fittin... Learn More
$7.95 -
The NuTone CF362 90 Degree Elbow fits the NuTone 360 Standard Full Door Wall Inlet Valve. Learn More
$6.00 -
True Central Vacuum Thin Wall PVC 2" O.D. NEVER use Plumbing PVC. Premium quality virgin "Flomax Gold". No regrinds. Shipping WILL apply to this item. Learn More
$296.95 -
Designed For Central Vacuum PVC Pipe
Leaves Clean Smooth Edges
Durable, High Quality, Long Lasting
Easy To Use
This durable all-metal central vacuum PVC pipe cutter features precision sharp blades that adjust to your pref... Learn More
$99.00 -
Fits Professional Pipe Cutter
Leaves Smooth Edges
Cuts PVC Pipe With Precision
Set Of 5 Sharp Blades
Set of 5 replacement blades for the all-metal central vacuum PVC pipe cutter. These sharp blades cut 2" centra... Learn More
$53.90 -
500 ft. schedule 18/2 low voltage wire. This wire is what connects your inlets to the central vacuum allowing the circuit to be completed when a hose is inserted into an inlet. This connection then tells the central vacuum to turn on. Learn More
$98.75 -
This pipe adapter is used to upgrade older central vacuum system to modern 2" piping. The pipe adapter is a 2" to 1 & 13/16. If you have any questions please call 1-800-322-2965 and one of our central vacuum experts will be happy to assist you. Learn More
$6.95 -
The 45° spigot elbow is used as a connector in central vacuum piping for a smooth change in direction. It fits 2" central vacuum piping and easily connects to other fittings. Learn More
$1.95
High-Quality Material
FlowMax Gold is produced only from 100% virgin PVC material. We do not use recycled material or ground-up plastic of any type in FlowMax Gold.
Easier and Faster Installation
FlowMax Gold is manufactured to rigorous standards to ensure part to part consistency. Better cuts, consistent fit to fittings, and superior cement adhesion let you get your [brandname] central vacuum installation done right and quickly the first time – every time. Sorting pipe at the job site, having to cut out bad sections, or in the worst case, getting a callback to the job site of a finished home where finished walls must be torn apart to find a leak, all rob you of your time money.
Superior Fit
Have you ever had a problem with your fittings being too loose or falling off the pipe? Have you ever had to hammer a fitting on to the end of a pipe? If so, you’ve probably been seeing the effects of bad or inconsistent pipe outside diameter. Using our proprietary, outside diameter production control technology, we have remarkable control on the outside diameter of our FlowMax Gold. This means a superior and very consistent fit.
Log In
Create New Account