NuTone 360 Standard Full Door Wall Inlet Valve

Read about the 360 Full Door Standard NuTone Wall Inlet Valve

About NuTone 360 Standard Inlet for Central Vacuums
Nutone has launched a series of automatic on/off wall inlets which accommodate the passage of the electric charge through low voltage vacuum hoses with the Nutone inlet 360 being one of the models in this series. Available in various designs, this wall inlet does not draw too much attention but it remains an essential addition.

The Nutone inlet 360 can be used with all the power units in the Nutone collection, so its versatility is remarkable. However, it only fulfills its task if fitted on a 361 or 361F mounting bracket, but the fact that it does not require the use of any additional wires is a big plus. If the installation is done properly, the system will be enabled automatically the very moment the vacuum hose is inserted and shut down when it is removed. The snap-back cover of the Nutone 360 maximizes the ease of use and convenience of this wall inlet, preventing it from remaining open at any time.

The color palette of these automatic on/off wall inlets is wide enough with the five different shades it includes, namely the standard almond, white, ivory, beige and brown. This palette gives them quite an advantage from an aesthetic point of view, an advantage which is enhanced by their attractive dimensions – 3.75 inches in width, 3 inches in height and 0.625 inches in depth.

The Nutone inlet 360 is usually available in 20-piece packages that weigh 6 pounds and are 10 inches wide, 5 inches high and 18 inches deep. However, what matters more is that it is a highly reliable, resistant and convenient accessory with very few aesthetic or technical requirements.

Automatic on/off inlets can be installed in walls or floors and are designed to work with low voltage hoses. A durable textured surface is available in colors to complement your home décor.

• The attractive textured cover is designed to blend with your décor, in a choice of colors, so you can pick just the right one to blend with paint or wall coverings
• Opens with a pull-down door to allow easy plug-in of your low voltage or utility hose so you can get right to work
• No extra wiring needed ensures simplified installation; installs with CF361 or CF361F mounting bracket, or 395 or 396-3 rough-in kits; overall size is 3-3/4w x 3h x 5/8d

Check out here for more central vacuum NuTone wall inlets